Best Seller


Network Adapter, CC-Link IE Field Basic



Interface Specification, GN-9284 (CC-Link IE Field Basic Network Adapter)

Adapter TypeSlave station (CC-Link IE Field Basic Server)
ProtocolCC-Link IE Field Basic, SLMP
Port number61450 (CyclicData)
61451 (port number of the slave station of NodeSerch)
Max. Expantsion Module32 slots
Number of occupied stations1 ~ 4 stations
Max. Data Size(RX, RY)each 32 bytes (4 Stations occupied)
Max. Data Size(RWr, RWw)each 256 bytes (4 Stations occupied)
Max. link points per station (RX, RY)each 64 points
Max. link points per station (RWr,RWw) each 32 points
Max Length Bus LineUp to 100m from Ethernet Hub/Switch with twisted CAT5 UTP/STP
Max. NodesLimited by Ethernet Specification.
Baud Rate10/100Mbps, Auto-negotiation, Full duplex
Interface ConnectorRJ-45 socket * 2pcs
IP-Address SetupVia DHCP/BOOTP or IOGuide(Crevis Software)
IP-Address ~ 253 (User area) ~ 255 (Reserved for IAP Function)
Serial PortRS232 for MODBUS/RTU, Touch Pannel or IOGuide
Serial Configuration (RS232)Node : 1 (Fixed)
Baud Rate : 115200 (Fixed)
Data bit : 8 (Fixed)
Parity bit : No parity (Fixed)
Stop bit : 1 (Fixed)
Indicator6 LEDs
1 Green/Red, Module Status (MOD)
1 Green, Physical Connection (DLINK)
1 Green, Exchange Data/Traffic Present (RUN/ERR)
1 Green/Red, Expansion I/O Module Statsus (IOS)
1 Green, System Power Status
1 Green, Field Power Status
2 LEDs (each RJ45 Connector)
1 Yellow, Link/Active
1 Green, Not used
Module LocationStarter module left side of G-Series system
Field Power DetectionAbout 14Vdc

General Specification

System PowerSupply voltage : 24Vdc nominal
Supply voltage range : 16~32Vdc
Protection : Output current limit (Min. 1.5A)
Reverse polarity protection
Power DissipationRefer to Network Adapter Manual
Current for I/O Module1.5A @ 5Vdc (When using in ‘60℃ ~ 70℃’ temperature environment,
the power dissipation is limited to 0.8A.)
IsolationSystem power to internal logic : Non-isolation
System power I/O driver : Isolation
Field PowerSupply voltage : 24Vdc typical (Max. 32Vdc)
* Field Power Range is different depending on IO Module series.
Refer to IO Module`s Specification.
Max. Current Field Power ContactDC 10A Max.
Module Size54mm x 99mm x 70mm

Quick Start

GN-9284 / GL-9084 Quick Start GuideDownload


Catalog - G-SeriesDownload
Manuals - Network AdaptersDownload
Manuals - Digital InputsDownload
Manuals - Digital OutputsDownload
Manuals - Analog InputsDownload
Manuals - Analog OutputsDownload
Manuals - Special ModulesDownload
Manuals - Power ModulesDownload
CAD Files
G-Series 2D Files (DWG)Download
G-Series 3D Files (STP)Download
IO Guide ProDownload
CSPP File: GL-9084Download
CSPP File: GN-9284Download
CSPP File: GN-9285Download
EDS File: GN-9289Download