Specifications
Interface Specification, GN-9231 (CC-Link Network Adapter)
| Adapter Type | Slave node (CC-Link Version 1) |
| Station class | Remote Device station |
| Max. Expansion Slot | 63 slots |
| I/O Data Size | System area : 16 points RX/RY : 112 points(4staion occupied) RWr/RWw : 16 points(4station occupied) |
| Max. Network Node | 42 Node/Max |
| Baud Rate | 156/625/2500/5000/10000Kbps |
| Interface Connector | 5 Pin open connector |
| Indicator | 5 LEDs 1 Green/Red, Module Status (MOD) 1 Green, Current Running Status (NET) 1 Green, Error Status (ERROR) 1 Green/Red Expansion I/O Module Statsus (IOS) 1 Green, Field Power Status 2 LEDs (each RJ45 Connector) 1 Green, Active 1 Yellow, Link |
| Field Power Detection | About 14Vdc |
General Specification
| System Power | Supply voltage : 24Vdc nominal Supply voltage range : 16~32Vdc Protection : Output current limit (Min. 1.5A) Reverse polarity protection |
| Power Dissipation | Refer to Network Adapter Manual |
| Current for I/O Module | 1.5A @ 5Vdc (When using in ‘60℃ ~ 70℃’ temperature environment, the power dissipation is limited to 0.8A.) |
| Isolation | System power to internal logic : Non-isolation System power I/O driver : Isolation |
| Field Power | Supply voltage : 24Vdc typical (Max. 32Vdc) * Field Power Range is different depending on IO Module series. Refer to IO Module`s Specification. |
| Max. Current Field Power Contact | DC 10A Max. |
| Module Size | 54mm x 99mm x 70mm |
