Specifications
Interface Specification, GN-9212 (DeviceNet Network Adapter)
| Adapter Type | Group 2 Only Slave |
| Max. Expansion Module | 63 Slots |
| I/O Data Size | In : 512 bytes, Out : 512 bytes |
| Max. Length Bus Line | Max.100m@500Kbps, Max. 250m@250Kbps, Max. 500m@125Kbps |
| Max. Network Node | 64 Nodes |
| Baud Rate | 125Kbps(Max. 500m) 250Kbps(Max. 250m) 500Kbps(Max. 100m) |
| Protocol | Poll, Bit-Strobe, Cyclic, COS |
| Node MAC ID Setup | DIP Switch |
| Terminating Resistance Setup | DIP Switch |
| Bus Connection | 5 Pin Open-Style Connector |
| Other Serial Port | RS232 for MODBUS/RTU, Touch Panel or IOGuide |
| Serial Configuration (RS232) | Node : 1 (Fixed) Baud Rate : 115200 (Fixed) Data bit : 8 (Fixed) Parity bit : No parity (Fixed) Stop bit : 1 (Fixed) |
| Indicator | 6 Status LEDs 1 Green/Red, Module Status (MOD) 1 Green/Red, Network Status (NET) 1 Green, Terminating Resistance Status (TER) 1 Green/Red, Expansion I/O Module Statsus (IOS) 1 Green, System Power Status 1 Green, Field Power Status |
| Module Location | Starter module left side of G-Series system |
| Field Power Detection | About 14Vdc |
General Specification
| System Power | Supply voltage : 24Vdc nominal Supply voltage range : 16~32Vdc Protection : Output current limit (Min. 1.5A) Reverse polarity protection |
| Power Dissipation | Refer to Network Adapter Manual |
| Current for I/O Module | 1.5A @ 5Vdc (When using in ‘60℃ ~ 70℃’ temperature environment, the power dissipation is limited to 0.8A.) |
| Isolation | System power to internal logic : Non-isolation System power I/O driver : Isolation |
| Field Power | Supply voltage : 24Vdc typical (Max. 32Vdc) * Field Power Range is different depending on IO Module series. Refer to IO Module`s Specification. |
| Max. Current Field Power Contact | DC 10A Max. |
| Module Size | 54mm x 99mm x 70mm |
